GENESIS

Haut-parleurs en éléments séparés, tarif pour la paire .

Tweeter R1

Technical Information:
Description:	25mm Ring Radiator Tweeter
Impedance:	4 ohms nominal
Power Handling:	10W RMS Continuous Pink noise 300W RMS System amplifier power
Frequency Range:	2 – 40 KHz +/- 2dB
Fs Resonant Frequency:	520 Hz
Re D.C Resistance:	3.0 Ohms
Md Moving Mass:	0.3 Grams
Sd Cone area:	5.6 cm2
Bl Force Product:	2.8 Tm
Voice coil diameter:	25mm
Sensitivity:	91.5dB 1w/1m
X-max Linear/Max excursion:	0.2/1.6 mm

Tweeter D1

DOC PDF

Technical Information:
Description:	28mm Soft Dome Tweeter
Impedance:	4 ohms nominal
Power Handling:	10W RMS Continuous Pink noise 300W RMS System amplifier power
Frequency Range:	2.5 – 20 KHz +/- 2dB
Fs Resonant Frequency:	750 Hz
Re D.C Resistance:	3.5 Ohms
Md Moving Mass:	0.4 Grams
Sd Cone area:	8.0 cm2
Bl Force Product:	2.7 Tm
Voice coil diameter:	28mm
Sensitivity:	87dB 1w/1m
X-max Linear/Max excursion:	0.25/1.3 mm

Médium 12M

DOC PDF

Technical Information:
Description:	12 cm Midrange for 3 way systems.
Impedance:	4ohms nominal
Power Handling:	50W RMS Continuous Pink noise 300W RMS System amplifier power
Frequency Range:	300 - 7000Hz as Midrange
Enclosure Volume:	3 –10 litres with damping material
Fs Resonant Frequency:	75.0 Hz
Re D.C Resistance:	3.2 Ohms
Md Cone Mass:	6.5 Grams
Sd Cone area:	49 cm2
Bl Force Product:	5.3 Tm
Rm Mechanical resistance:	0.55 Ns/m
Qm Mechanical Q Factor:	5.6
Qe Electrical Q factor:	0.35
Qt Total Q factor:	0.33
Vas Equivalent volume :	2.4 litres
X-max Linear excursion (one way):	3.0 mm

Mid Woofer 15MB

DOC PDF

Technical Information:
Description:	15 cm Midbass for 2 & 3 way systems
Impedance:	3 ohms nominal
Power Handling:	80W RMS Continuous Pink noise 300W RMS System amplifier power
Frequency Range:	60 - 5000Hz as Midrange
Enclosure Volume:	10 litres to free air
Fs Resonant Frequency:	66.0 Hz
Re D.C Resistance:	2.8 Ohms
Md Cone Mass:	12.6 Grams
Sd Cone area:	95 cm2
Bl Force Product:	5.5 Tm
Rm Mechanical resistance:	0.6 Ns/m
Qm Mechanical Q Factor:	8.71
Qe Electrical Q factor:	0.48
Qt Total Q factor:	0.45
Vas Equivalent volume :	5.9 litres
X-max Linear excursion (one way):	5.3 mm

Mid Woofer 18W

DOC PDF

Technical Information:
Description:	18 cm Midbass for 2 & 3 way systems
Impedance:	4 ohms nominal
Power Handling:	100W RMS Continuous Pink noise 300W RMS System amplifier power
Frequency Range:	50 - 500Hz as Midrange
Enclosure Volume:	20 litres to free air
Fs Resonant Frequency:	54.5.0 Hz
Re D.C Resistance:	3.45 Ohms
Md Cone Mass:	19 Grams
Sd Cone area:	150 cm2
Bl Force Product:	5.8 Tm
Rm Mechanical resistance:	0.8 Ns/m
Qm Mechanical Q Factor:	8.13
Qe Electrical Q factor:	0.67
Qt Total Q factor:	0.62
Vas Equivalent volume :	14.3 litres
X-max Linear excursion (one way):	6.5 mm

Filtre passif 2 voies

Filtre passif bi-amplifiable
Niveau du tweeter réglable
Pentes de coupure de 6dB par octave :)

Filtre passif 3 voies

Filtre passif tri-amplifiable
Niveau du tweeter réglable
Pentes de coupure de 6dB par octave :)

Kits complets Absolute 1

Absolute 1.2

Kit éclaté 2 voies comprenant:

- une paire de Mid Woofers 15MB
- une paire de Tweeters D1
- une paire de filtres passifs 2 voies
- la fameuse notice

Et tout ceci est livré dans une jolie boîte, en vrai bois d'arbre :)

Attention sur la photo il s'agit des tweeters R1 .

Absolute 1.3

Kit éclaté 3 voies comprenant:

- une paire de woofers 18W
- une paire de Mediums 12M
- une paire de Tweeters D1
- une paire de filtres passifs 2 voies
- la fameuse notice

Et tout ceci dans une jolie boîte, en vrai bois d'arbre :)

Kits complets Absolute 2

Absolute 2.2

Kit comprenant:

- une paire de Mid Woofers 15MB
- une paire de Tweeters R1
- une paire de filtres passifs 2 voies
- la fameuse notice

Et tout ceci dans une jolie boîte, en vrai bois d'arbre :)

Absolute 2.3

Kit éclaté 3 voies comprenant:

- une paire de Woofers 18W
- une paire de Médiums 12M
- une paire de Tweeters R1
- une paire de filtres passifs 2 voies
- la fameuse notice

Et tout ceci dans une jolie boîte, en vrai bois d'arbre :)

Kits éclatés Audiophile

GENESIS Audiophile 13.03

Technical Information:
System type:	2 way component
Manufactured:	Drive units, Hand made in Italy Crossover, Hand made by Genesis in England
Frequency response:	-6dB @ 77 Hz & 22 kHz , (15 litre sealed box).
Power rating:	80 watts RMS. Matching amp from 30 -100 Genesis watts.
Efficiency:	89dB for 1 watt @ 1 metre ( 92dB 2.83V @ 1metre )
Element sizes:	13cm / 5.25" bass/mid, 2.5cm / 1.0" silk dome tweeter
Mounting depth:	54mm / 10mm
Construction:	Bass / mid: Aluminuim coated Glassfibre cone with butyl rubber surround driven by a 2-layer voice coil wound on 1" aluminium former. The magnet assembly is vented to assist VC cooling. The chassis is made from a non resonant mineral filled resin. Centre dome is acoustically transparent fabric to allow HF from centre of cone through. Centre magnet pole is Copper Clad to give smooth and extended midrange response. Tweeter: Coated silk fabric is used for the tweeter dome. This is driven by a ferrofluid damped coil. Crossover: The crossover feeds the tweeter via a RIFA polypropylene capacitor for excellent treble clarity. The midbass is rolled off at 6dB/ octave, and the tweeter at 12dB/octave. The tweeter is protected by a polyswitch device. This case is in aluminium to dissipate any heat generated by the network, and to provide both shielding and cosmetic integration.
Installation:	The shallow mounting depth of the tweeter allows easy installation in kick panels. The midbass is suitable for small enclosure mounting, but also gives good results in free air applications.

GENESIS Audiophile 16.03

Power rating:	80 watts RMS. Matching amp from 30 -100 Genesis watts.
Efficiency:	89dB for 1 watt @ 1 metre ( 92dB 2.83V @ 1metre )
Element sizes:	17cm / 6.5" bass/mid, 2.5cm / 1.0" silk dome tweeter
Mounting depth:	56mm / 10mm
Construction:	Bass / mid: Aluminium coated Glassfibre cone with butyl rubber surround driven by a 2-layer voice coil wound on 1" aluminium former. The magnet assembly is vented to assist VC cooling. The chassis is made from a non resonant mineral filled resin. Centre dome is acoustically transparent fabric to allow HF from centre of cone through. Centre magnet pole is Copper Clad to give smooth and extended midrange response. Tweeter: Coated silk fabric is used for the tweeter dome. This is driven by a ferrofluid damped coil. Crossover: The crossover feeds the tweeter via a RIFA polypropylene capacitor for excellent treble clarity. The midbass is rolled off at 6dB/ octave, and the tweeter at 12dB/octave. The tweeter is protected by a polyswitch device. This case is in aluminium to dissipate any heat generated by the network, and to provide both shielding and cosmetic integration.
Installation:	The shallow mounting depth of the tweeter allows easy installation in kick panels.

Sub-Woofers Audiophile

Audiophile 25.01

Technical Data For Audiophile 25.01
Impedance:	Zn	4 ohms
DC resistance:	Re	3.2 Ohms
Mechanical Q:	Qms	7.75
Electrical Q:	Qes	0.53
Total Q Factor:	Qts	0.50
Resonant freq.:	Fs	29.3 Hz
Moving mass:	Mms	88.2 g
Equivalent Volume:	Vas	57.2 litres
Effective cone area:	Sd	333 Cm`2`
Force Factor:	Bl	10.3
Voice Coil Diameter:	d	51mm
Voice coil length:	h	33mm
Number of layers:	n	2
Sensitivity:	dB	89.4
Mounting hole diameter:		240mm
Mounting depth:		120mm
Weight:		5.7Kg
Recommended Enclosure (Sealed):		20 litres

Audiophile 30.01

Technical Data For Audiophile 30.01
Impedance:	Zn	4 ohms
DC resistance:	Re	3.2 Ohms
Mechanical Q:	Qms	8.31
Electrical Q:	Qes	0.56
Total Q Factor:	Qts	0.53
Resonant freq.:	Fs	24.8 Hz
Moving mass:	Mms	111.3 g
Equivalent Volume:	Vas	111.4 litres
Effective cone area:	Sd	466 Cm`2`
Force Factor:	Bl	10.3
Voice Coil Diameter:	d	51mm
Voice coil length:	h	33mm
Number of layers:	n	2
Sensitivity:	dB	90.4
Mounting hole diameter:		279mm
Mounting depth:		120mm
Weight:		6.2Kg
Recommended Enclosure (Sealed):		30 litres

Kits éclatés Profile

P16.2

16.5cm (6.5“)

Recommended Amplifier Power: 20 – 80 W RMS

Sensitivity: 90dB - 1 w/1m

Freq response: 65Hz – 22Khz +/- 4dB