Kit 3 voies F"1 STATUS

                                                                                                                       
                                Tweeter avec pièce de mise en phase                                                            Filtre passif  bi et tri amplifiable

Kit comprenant	2xTweeters de 3.9 cm  2x Woofers médiums de 10cm avec membrane en fibre de bois  2x Woofers de 18cm avec membrane en fibre de bois  2x Filtres passifs 3 voies
Réponse en fréquence	35Hz – 60kHz
Puissance maximum	200W
Puissance RMS minimum recommandé	50W
Impedance nominale	4Ω
Poids	2 kg (woofer) / 0.55 kg (mid-range woofer) / 0.4 kg (tweeter)

Voie centrale F"1 STATUS

Crossover Network

• Mounting: Easy-Mount Screw Terminals
• Attenuation Control: 4 - Level
• Case Design: Audiophile Layout
• Grade: Audiophile / Expert Grade Network

Woofer

• Frame: Machined Low-Carbon Steel U-Yoke
• Mounting: Shallow Mounting Design
• Magnet: High Grade Neodymium Magnet
• Cooling: Airflow Management
• Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
• Motor Technology: Heat Transfer Motor/Frame Coupling
• Cone Material: Hybrid Cross-Rib Glass Fiber Cone
• Dustcap Detail: Machined Aluminum Phase Plug with Direct Heat Transfer Heat-Sink

Tweeter

• Magnet Material: Low Disortion High-Grade Neodymium Motor Structure with Copper Shorting Cap
• Application Type / Design Detail: External / Flush Tweeter Mounting Kit
• Mounting Design: 13/16'' Depth Mounting Design (with cup)
• Tweeter Type: Smooth, 1-1/4'' Ring Tweeter with Tuned Chamber and Integrated Wave Guide

General

• Sensitivity: 88dB /W(1m)
• Impedence: 4 Ohms
• Frequency Response: 35Hz - 60kHz

Dimensions

• Crossover Size (in): 4-13/32'' x 6-3/7'' x 1-1/4''
• Crossover Size (mm): 112mm x 162mm 32mm
• Woofer Mounting Depth (in): 2-1/2''
• Woofer Mounting Depth (mm): 64mm
• Woofer Mounting Diameter (in): 5-9/32''
• Woofer Mounting Diameter (mm): 134mm
• Woofer Diameter (in): 6''
• Woofer Diameter (mm): 153mm
• Tweeter Mounting Depth (in): 45/64''
• Tweeter Mounting Depth (mm): 18mm
• Tweeter Mounting Diameter (in): 1-55/64''
• Tweeter Mounting Diameter (mm): 47mm

Power Handling

• Power Handling Capacity (Peak): 300 Watts
• Power Handling Capacity (RMS): 100 Watts
• CEA-2031 Power Rating: 100 Watts

Crossover Network

• Mounting: Easy-Mount Screw Terminals
• Attenuation Control: 4 - Level
• Case Design: Audiophile Layout
• Grade: Audiophile / Expert Grade Network

Woofer

• Frame: Machined Low-Carbon Steel U-Yoke
• Mounting: Shallow Mounting Design
• Magnet: High Grade Neodymium Magnet
• Cooling: Airflow Management
• Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
• Motor Technology: Heat Transfer Motor/Frame Coupling
• Cone Material: Hybrid Cross-Rib Glass Fiber Cone
• Dustcap Detail: Machined Aluminum Phase Plug with Direct Heat Transfer Heat-Sink

Tweeter

• Magnet Material: Low Disortion High-Grade Neodymium Motor Structure with Copper Shorting Cap
• Application Type / Design Detail: External / Flush Tweeter Mounting Kit
• Mounting Design: 13/16'' Depth Mounting Design (with cup)
• Tweeter Type: Smooth, 1-1/4'' Ring Tweeter with Tuned Chamber and Integrated Wave Guide

General

• Sensitivity: 87dB /W(1m)
• Impedence: 4 Ohms
• Frequency Response: 40Hz - 60kHz

Dimensions

• Crossover Size (in): 4-13/32'' x 6-3/7'' x 1-1/4''
• Crossover Size (mm): 112mm x 162mm 32mm
• Woofer Mounting Depth (in): 2-11/32''
• Woofer Mounting Depth (mm): 59.4mm
• Woofer Mounting Diameter (in): 4-17/32''
• Woofer Mounting Diameter (mm): 115mm
• Woofer Diameter (in): 5-1/8''
• Woofer Diameter (mm): 130mm
• Tweeter Mounting Depth (in): 45/64''
• Tweeter Mounting Depth (mm): 18mm
• Tweeter Mounting Diameter (in): 1-55/64''
• Tweeter Mounting Diameter (mm): 47mm

Power Handling

• Power Handling Capacity (Peak): 240 Watts
• Power Handling Capacity (RMS): 80 Watts
• CEA-2031 Power Rating: 80 Watts

Crossover Network

• Mounting: Easy-Mount Screw Terminals
• Attenuation Control: 4 - Level
• Case Design: Audiophile Layout
• Grade: Expert Grade Network

Woofer

• Frame: Machined Low-Carbon Steel U-Yoke
• Mounting: Shallow Mounting Design
• Magnet: High Grade Neodymium Magnet
• Cooling: Airflow Management
• Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
• Motor Technology: Heat Transfer Motor/Frame Coupling
• Cone Material: Cross-Rib Aluminum Cone with VC & Surround Coupling Reinforced
• Dustcap Detail: Aluminum Cone

Tweeter

• Magnet Material: Low Disortion Triple-Stack Neodymium Motor Structure
• Application Type / Design Detail: External / Swivel Tweeter Mounting Kit
• Mounting Design: 53/64'' Depth Mounting Design (with cup)
• Tweeter Type: Smooth, 1'' Ring Tweeter with Tuned Chamber

General

• Sensitivity: 88dB /W(1m)
• Impedence: 4 Ohms
• Frequency Response: 35Hz - 40kHz

Dimensions

• Crossover Size (in): 5-3/4'' x 3-37/64'' x 1-11/32''
• Crossover Size (mm): 146mm x 91mm x 34mm
• Woofer Mounting Depth (in): 2-17/32''
• Woofer Mounting Depth (mm): 65mm
• Woofer Mounting Diameter (in): 5-17/64''
• Woofer Mounting Diameter (mm): 134mm
• Woofer Diameter (in): 6-11/32''
• Woofer Diameter (mm): 161.20
• Tweeter Mounting Depth (in): 5/8''
• Tweeter Mounting Depth (mm): 16mm
• Tweeter Mounting Diameter (in): 1-13/32''
• Tweeter Mounting Diameter (mm): 36mm

Power Handling

• Power Handling Capacity (Peak): 225 Watts
• Power Handling Capacity (RMS): 75 Watts
• CEA-2031 Power Rating: 75 Watts

Crossover Network

• Mounting: Easy-Mount Screw Terminals
• Attenuation Control: 4 - Level
• Case Design: Audiophile Layout
• Grade: Expert Grade Network

Woofer

• Frame: Machined Low-Carbon Steel U-Yoke
• Mounting: Shallow Mounting Design
• Magnet: High Grade Neodymium Magnet
• Cooling: Airflow Management
• Voice Coil Type: High Temp VC CCAW Wire on 39mm Aluminum Former
• Motor Technology: Heat Transfer Motor/Frame Coupling
• Cone Material: Cross-Rib Aluminum Cone with VC & Surround Coupling Reinforced
• Dustcap Detail: Aluminum Cone

Tweeter

• Magnet Material: Low Disortion Triple-Stack Neodymium Motor Structure
• Application Type / Design Detail: External / Swivel Tweeter Mounting Kit
• Mounting Design: 53/64'' Depth Mounting Design (with cup)
• Tweeter Type: Smooth, 1'' Ring Tweeter with Tuned Chamber

General

• Sensitivity: 88dB /W(1m)
• Impedence: 3.6 Ohms
• Frequency Response: 40Hz - 40kHz

Dimensions

• Crossover Size (in): 5-3/4'' x 3-37/64'' x 1-11/32''
• Crossover Size (mm): 146mm x 91mm x 34mm
• Woofer Mounting Depth (in): 2-1/4''
• Woofer Mounting Depth (mm): 60.5mm
• Woofer Mounting Diameter (in): 4-17/32''
• Woofer Mounting Diameter (mm): 115mm
• Woofer Diameter (in): 5-7/64''
• Woofer Diameter (mm): 130mm
• Tweeter Mounting Depth (in): 5/8''
• Tweeter Mounting Depth (mm): 16mm
• Tweeter Mounting Diameter (in): 1-13/32''
• Tweeter Mounting Diameter (mm): 36mm

Power Handling

• Power Handling Capacity (Peak): 180 Watts
• Power Handling Capacity (RMS): 60 Watts
• CEA-2031 Power Rating: 60 Watts

• Aimant Linear Drive
• Cone Multi couches
• Fil de bobine mobile à design carré
• Bobine mobile surdimensionnée
• Suspension caoutchouc

• Tweeter à dome 2,5cm
• Montage sur rotule

• Ajustement du tweeter réglable sur 7 niveaux

• Adaptateurs 1ère monte fournis
• Adaptateur 15x21cm fourni

• Puissance MAX : 330W
• Puissance RMS : 110W

Caractéristiques

Haut-parleur de graves

• Aimant Linear Drive
• Cone Multi couches
• Fil de bobine mobile à design carré
• Bobine mobile surdimensionnée
• Suspension caoutchouc

• Tweeter à dome 2,5cm
• Montage sur rotule

• Ajustement du tweeter réglable sur 7 niveaux

• Adaptateurs 1ère monte fournis
• Adaptateur 15x21cm fourni

• Puissance MAX : 300W
• Puissance RMS : 100W
• Réponse en fréquence : 70Hz - 27kHz
• Sensibilité : 86dB/W (1m)
• Diamètre d'installation : 117mm
• Profondeur : 55mm

Caractéristiques

Haut-parleur de graves

• Aimant Linear Drive
• Cone Multi couches
• Fil de bobine mobile à design carré
• Bobine mobile surdimensionnée
• Suspension caoutchouc

• Tweeter à dome 2,5cm
• Montage sur rotule

• Puissance MAX : 300W
• Puissance RMS : 100W
• Réponse en fréquence : 60Hz - 27kHz
• Sensibilité : 89dB/W (1m)
• Diamètre d'installation : 146 x 216mm
• Profondeur : 75mm

• Silk Soft-dome Tweeter w/Swivel Capability

• Square Voice Coill Wire

• Power Handling Capacity (RMS): 50W
• Power Handling Capacity (Peak): 250W

• Mounting Depth (mm): 76.4mm
• Mounting Diameter (mm): 222mm x 150mm
• Peak Power Rating: 250W
• RMS Power Rating: 50W
• Weight (One Speaker): 2.3kg
• Frequency Response: 30Hz - 30kHz
• Impedance (Nominal): 4 Ohm
• Sensitivity: 92 dB/W/m

• Woofer Depth (mm): 76.2mm
• Woofer Diameter (mm): 152.4mm x 228.6mm  
• Woofer Mounting Diameter (mm): 226.06mm x 228.6mm

Spécifique Ford et Mazda

FEATURES
Tweeter

• Silk Soft-dome Tweeter w/Swivel Capability

• Square Voice Coill Wire

• Power Handling Capacity (RMS): 50W
• Power Handling Capacity (Peak): 250W

• Mounting Depth (mm): 63.5mm
• Mounting Diameter (mm): 183mm x 126mm
• Peak Power Rating: 200W
• RMS Power Rating: 40W
• Weight (One Speaker): 2.64kg
• Frequency Response: 35Hz - 30kHz
• Impedance (Nominal): 4 Ohm
• Sensitivity: 92 dB/W/m

• Woofer Depth (mm): 63.5mm  
• Woofer Diameter (mm): 127mm x 177.8mm  
• Woofer Mounting Diameter (mm): 185.42mm x 127mm ¨

• Puissance Max 120W
• Puissance RMS 30W
• Réponse en fréquence: 5kHz-22kHz
• Moteur au Néodyme
• Tweeter  à dôme Titane

Les tweeters sont livrés avec leurs filtres sur le cablage.

CAISSON AVEC SUBWOOFER 20CM ET AMPLI INTEGRE 150W MAX

- Amplificateur intégré et télécommande filaire
- Filtre passe-bas variable : 50Hz - 125Hz (24dB/oct)
- Réglage de gain
- Sélection de phase
- Puissance Max : 150W
- Dimensions : largeur 25cm, epaisseur 11.4cm, hauteur 27.2cm

Puissance maximale de 350W
• Bande passante 35Hz – 200Hz (-24dB/oct.)
• Woofer conique 12" (30 cm)
• Contrôle filtre passe-bas
• Contrôle de puissance
• Entrées haut-parleur et ligne RCA
• Egaliseur de graves variable
• Compatible entrée 4V

• MAX 800W
• RMS 250W
• Réponse en fréquence: 28Hz-1kHz
. Sensibilité de 90 dB/W
• Double spider progressif en Nomex
• Haute excursion 3/4" en Santoprene
• Membrane en Kevlar / Cellulose
• Conçu aux USA

• Conçu aux USA
• Bornier plaqué or
• Un seul bornier de branchement pour les deux bobines
• Triple ferrite Strontium
• Suspension multi plis en SANTOPRENE 
• Spider en NOMEX
• Moteur CRC T-Drive  avec bague en cuivre et plaque de transfert.
• Multi ventilation 
• Double bobine de 4 ohms supportant 220°C
• Saladier aluminium
• Membrane aluminium carbon
• Réponse en fréquence: 20Hz – 500Hz
• RMS: 1000W
• MAX: 3000W
Fontionne dans un caisson clos à partir de 33L